Angular contact ball bearings

Available D50:2～45μm. Classifying wheel is vertical installation Integration of grinding and classifying, classifying wheel is adjusted to obtain ideal particle. Compact structure and small occupation, easy to disassemble and clean, no dead angle design Lower installation power, wide application, high cost-performance. Different types of grinding disc (pin, hammer, teeth or others) are used based on characteristics of materials to obtain different grinding forces and improve grinding efficiency. Key parts like the hammer, gear ring and classifying wheel are made of ceramic such as aluminum oxide, zirconium oxide or silicon carbide, ensuring non-contact with metal throughout the grinding for high purity of the final product. Grinding is in closed system, low dust and noise, clean and environmentally friendly production process. PLC control system, easy operation. The motor can be connected with a belt to increase the speed and break through the problem of high-speed motors without the well-known motor brand. Can be used in series with multi-stage classifiers to produce products with multiple sizes at one time. Optional explosion-proof design, meet the ultra-fine grinding processing requirements of flammable and explosive oxide materials High-temperature, low-temperature, normal-temperature, airtight cycle, Inert gas cycle designs are available, for different grinding requirements of different materials.

Adapter sleeve

dapter sleeves are the most commonly used parts when positioning bearings with tapered holes on cylindrical shafts, because they can be used for optical shafts or stepped shafts. This kind of shaft sleeve is easy to install and does not need to be fixed on the shaft. When using an adapter sleeve on an optical shaft, the bearing can be positioned at any position on the shaft. When used together with a stepped ring on a stepped shaft, the bearing can be accurately positioned in the axial direction, which also facilitates the removal of the bearing.

Angular contact ball bearings

The angular contact ball bearings can bear both radial load and axial load at the same time, and can work at higher speed. The larger the contact angle is, the higher the axial bearing capacity is. High-precision and high-speed bearings usually take a contact angle of 15°. Under the action of axial force, the contact angle will increase. It can be divided into single-row angular contact ball bearings and double-row angular contact ball bearings.

Angular contact ball bearings

The angular contact ball bearings can bear both radial load and axial load at the same time, and can work at higher speed. The larger the contact angle is, the higher the axial bearing capacity is. High-precision and high-speed bearings usually take a contact angle of 15°. Under the action of axial force, the contact angle will increase. It can be divided into single-row angular contact ball bearings and double-row angular contact ball bearings.

Angular contact ball bearings

The angular contact ball bearings can bear both radial load and axial load at the same time, and can work at higher speed. The larger the contact angle is, the higher the axial bearing capacity is. High-precision and high-speed bearings usually take a contact angle of 15°. Under the action of axial force, the contact angle will increase. It can be divided into single-row angular contact ball bearings and double-row angular contact ball bearings.